Goods: Construction, repair

KrovMarket Company

Reliable supplier of roofing and facade materials in Almaty.

We have been on the market for more than 10 years - we supply high-quality materials from trusted manufacturers with a guarantee and professional selection of solutions.

The assortment includes metal tiles, soft roofing, siding, drainage systems and everything for the roof and facade.

Address: Almaty, Zhusandy str., 1B

Website: https :// krov-market. kz/

Phones:

+7 707 236 46 56

+7 700 300 50 30

+7 747 544 05 54

Household linoleum from NAPOL LIN is a practical and stylish solution for your home!

Durability and comfort

Our linoleum is ideal for living spaces — it is scratch-resistant, easy to clean and retains its appearance for many years to come.

A variety of designs

Choose from dozens of collections, from imitations of natural wood and stone to modern abstract patterns. There is an ideal option for any interior!

Safety and environmental friendliness

We use only safe materials — linoleum does not emit harmful substances and is completely safe for children and pets.

Affordable price

High—quality flooring from the manufacturer - no overpayments!

Our address: Shymkent, Sairam 98 residential area

Phone: +7 701 572 94 84

Website: https ://napollin. kz

Instagram: https: //www. instagram. com/too_napol_lin

Masonry reinforcement mesh made of BP-1 wire with a diameter of 3 mm is used to strengthen brick and block masonry, reinforcement of screeds, floors and small concrete structures. The mesh increases the strength of the masonry, prevents the formation of cracks and increases the service life of building elements.

It is made of steel wire with a periodic profile, which ensures reliable adhesion to mortar and concrete. The 1×3 m cards are easy to transport and install.

The products meet construction requirements and are suitable for use in private and industrial construction. Delivery across Kazakhstan is possible.

A 15 mm diameter water and gas pipeline with a wall thickness of 2.8 mm is used for the installation of water supply, heating and gas supply systems. It is used in residential, commercial and industrial facilities when laying internal and external engineering networks.

It is manufactured according to GOST 3262-75 from steel grade St3sp, which ensures durability, reliability and good weldability. The pipe is resistant to operating pressure and mechanical stress, and is suitable for use in various climatic conditions.

The delivery is carried out in bars with a length of 6 m. The products are accompanied by quality certificates. Delivery across Kazakhstan is possible.

Galvanized profile sheet H60 0.8 mm thick is designed for roofing, interstory ceilings, permanent formwork and construction of industrial facilities. The H60 profile is characterized by high load-bearing capacity and resistance to loads, which makes it in demand in the construction of warehouses, hangars and industrial buildings.

The zinc coating protects the metal from corrosion and prolongs the service life of the structure even when operating in aggressive conditions. The trapezoidal sheet is easy to install, has high rigidity and is suitable for objects with high strength requirements.

The products are supplied in sheets measuring 0.845×6 m, comply with technical standards and are accompanied by quality certificates. Delivery across Kazakhstan is possible.

Galvanized profiled sheet grades C18, HC35 and C44 with a thickness of 0.45 mm is used for roofing, facades, fences and fences, as well as for the construction of warehouses, production and business facilities. The profile provides structural rigidity and resistance to wind and snow loads.

The galvanized coating protects the metal from corrosion and prolongs the service life of the material. The trapezoidal sheet is easy to install, has a low weight and is suitable for both private and industrial construction.

The products are supplied in 1×6 m sheets, meet the technical requirements and are available for delivery in Kazakhstan.

Rectangular profile tube 80×40×4 mm is used in the manufacture of load-bearing metal structures, building frames, canopies, hangars and industrial structures. Due to the increased wall thickness, it provides high strength and resistance to loads.

Manufactured according to GOST 30245-2003 and GOST 13663-86, it meets the requirements for geometry and mechanical characteristics. St2ps grade steel has good weldability and is suitable for assembling complex structures.

The delivery is carried out in bars with a length of 12 m. The products are accompanied by quality certificates. Delivery throughout Kazakhstan is possible.

Rectangular profile tube 40×20×2 mm is used in construction, production of metal structures, manufacture of frames, partitions, supporting elements and various technical products. Due to its rectangular cross-section, the pipe has high rigidity and relatively low weight.

It is manufactured in accordance with GOST 30245-2003 and GOST 13663-86, which guarantees the accuracy of geometry and compliance with mechanical characteristics. St2ps grade steel is characterized by good weldability and ease of machining.

The delivery is carried out in bars with a length of 6 m. The products are accompanied by quality certificates. Delivery across Kazakhstan is possible.

Seamless steel pipe with a diameter of 89 mm with a wall thickness of 6 mm is manufactured according to GOST 8732-78 and is used for the installation of heating mains, main pipelines, water supply systems and utility networks. The absence of a weld provides increased strength, resistance to pressure and reliability when operating under high loads.

The pipe made of grade 20 steel is characterized by good mechanical characteristics, resistance to temperature fluctuations and durability. It is used in construction, energy, industry and utilities.

It can be supplied in factory thermal insulation for underground and above-ground laying. The products are accompanied by quality certificates. We will arrange prompt delivery in Kazakhstan.

We supply seamless steel pipes according to GOST 8732-78 made of grade 20 steel for laying heating mains, water pipes and utility networks. The products are widely used in construction, energy and industry due to their high strength and resistance to internal pressure.

Seamless pipe with a diameter of 33.7 mm and a wall thickness of 3.5 mm is characterized by reliability, absence of a weld and increased resistance to mechanical stress. It is suitable for use in heating, hot and cold water supply systems, as well as for installation of main and distribution pipelines.

It is possible to supply pipes in factory thermal insulation for underground and above-ground laying of engineering networks. The products comply with the requirements of GOST, are accompanied by quality certificates and are ready for shipment with delivery in Kazakhstan.

Hot-rolled steel sheet with a thickness of 2 mm is used in construction, production of metal structures, mechanical engineering and manufacture of various metal products. It is used for cladding, manufacturing of parts, housings, frames and structural elements.

It is manufactured in accordance with current GOST standards, which guarantees compliance with the mechanical characteristics and quality of steel. The material is characterized by strength, ductility and good weldability.

The delivery is carried out in standard sheets of 1×2 m and 1.25×2.5 m. The products are accompanied by quality certificates. Prompt delivery across Kazakhstan is possible

A steel hexagon with a diameter of 22 mm made of St3 steel is used in mechanical engineering, construction and the manufacture of metal parts. It is used for manufacturing bolts, nuts, studs, fasteners, shafts and other structural products.

The material is characterized by good weldability and machinability, suitable for mechanical processing and subsequent heat treatment if necessary.

The delivery is carried out in bars with a length of 6.05 m. The products comply with the requirements of GOST and are accompanied by quality certificates. Delivery throughout Kazakhstan is possible.

Steel channel No. 20 made of St3sp-5 steel is used in construction and industry for the manufacture of load-bearing metal structures, building frames, support systems and floors. It is used in the construction of high-load facilities, including industrial and infrastructure projects.

The products are manufactured in accordance with GOST 8240-97 and GOST 535-88, they are characterized by high strength, bending resistance and good weldability.

The delivery is carried out in bars with a length of 12.05 m. The products are accompanied by quality certificates. Delivery in Kazakhstan.

Steel channel No. 5 made of St3sp-5 steel is used in construction, production of metal structures, installation of frame and support systems. It is used in the construction of floors, frames, reinforcement of load-bearing structures and the creation of metal frames for various purposes.

It is manufactured in accordance with the requirements of GOST 8240-97 and GOST 535-88, which guarantees compliance with the mechanical characteristics and quality of steel. It has high strength, good weldability and resistance to loads.

The delivery is carried out in bars with a length of 12.05 m. The products are accompanied by quality certificates. Prompt delivery across Kazakhstan is possible.

A 45×45×5 equal-floor metal corner made of St3ps/sp1-5 steel is used in the manufacture of metal structures, reinforcement of frames, and installation of supporting and load-bearing elements. It has high strength, good weldability and resistance to mechanical stress.

The delivery is carried out in bars with a length of 12.05 m. The products comply with the requirements of GOST, are accompanied by quality certificates and are available with delivery in Kazakhstan.

A 25×25×4 equal-floor metal corner made of St3ps/sp1-5 steel is used in construction, the manufacture of metal structures, frame systems, and the manufacture of supporting and reinforcing elements. The material is characterized by good weldability, strength and resistance to mechanical stress.

The delivery is carried out in bars with a length of 12.05 m. The products comply with the requirements of GOST, are accompanied by quality certificates and are available with prompt delivery in Kazakhstan.

We supply wire rod of various diameters for construction and production tasks. The products are used for reinforcing structures, making wire, metal meshes, nails, fasteners and other metal products.

Diameters available:

6 / 6,5 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 mm

Types of wire rod:

— steel and metal of various grades

— aluminum

— copper

— hot-rolled

— cold-rolled

— galvanized

The wire rod is characterized by high strength, ductility and convenience of further processing. The products comply with GOST requirements and are supplied directly from manufacturing plants, which guarantees quality and competitive price.

We will arrange prompt delivery throughout Kazakhstan within 1 to 3 days. Large volumes of supplies and regular supply of production facilities are possible.

Metal circle Ø16 mm

Diameter: 16mm

Steel grade: St3ps

Weight per meter: 1.61 kg

Theoretical number of meters per 1 ton: ~531 m

Rod length: 11.75 m

A metal circle with a diameter of 16 mm made of St3ps steel is used in construction, mechanical engineering and the manufacture of metal structures. The material is characterized by good weldability, ductility and ease of machining, which makes it in demand for the manufacture of shafts, axles, embedded elements, fasteners and other structural parts.

The circle is supplied in bars with a length of 11.75 m. The theoretical weight of one linear meter is 1.61 kg, which corresponds to about 531 meters per ton.

The products comply with the requirements of GOST and are accompanied by quality certificates. It can be cut to the customer's size and delivered throughout Kazakhstan.

A 12 mm diameter metal circle made of St3ps/sp-1 steel is used in construction, mechanical engineering and the manufacture of metal structures. The material is characterized by good weldability, ductility and ease of machining, which makes it in demand for the manufacture of parts, fasteners, axles, embedded and other structural products.

The bars are supplied with a standard length of 12.05 m or 11.75 m. The theoretical weight of one meter is 0.90 kg, which corresponds to about 302 meters per ton.

The products comply with the requirements of GOST, are accompanied by quality certificates and are available with delivery in Kazakhstan.

Reinforcing steel A-III, GOST 5781-82

Diameter: 16mm

Steel grade: A500C

Delivery form: coils (the weight of the bay is 1.63 t)

Rod length: 11.75 m

Class A-III reinforcing steel with a diameter of 16 mm made of A500C grade steel is designed for reinforcing critical reinforced concrete structures with increased load. The grooved profile provides reliable adhesion to concrete, increasing the strength and durability of the load-bearing elements.

Rebar with a diameter of 16 mm is widely used in the construction of foundations, columns, beams, floors, monolithic frames and infrastructure facilities. A500C grade steel is characterized by high tensile strength and good weldability, which facilitates the installation and manufacture of armored frames.

The delivery is carried out in coils weighing 1.63 tons, as well as in bars with a length of 11.75 m. The products comply with the requirements of GOST 5781-82, are accompanied by quality certificates and are suitable for use in civil and industrial construction projects.

Reinforcing steel A-III, GOST 5781-82

Diameter: 12 mm

Steel grade: A500C

Delivery form: coils (the weight of the bay is 0.90 t)

Rod length: 11.75 m

Class A-III reinforcing steel with a diameter of 12 mm made of A500C grade steel is used for reinforcing load-bearing reinforced concrete structures in civil and industrial construction. The grooved profile provides strong adhesion to concrete, increasing the structural resistance to loads and deformations.

The A500C brand is characterized by high strength and good weldability, which makes it possible to use reinforcement in the manufacture of frames, reinforcing meshes and monolithic elements. The diameter of 12 mm is in demand when installing foundations, floor slabs, columns and other critical structures.

The delivery is carried out in coils weighing 0.90 tons and in bars with a standard length of 11.75 m. The products comply with the requirements of GOST 5781-82, are accompanied by quality certificates and are suitable for use in projects of varying complexity.

Reinforcing steel A-III, GOST 5781-82

Diameter: 10 mm

Steel grade: A500C

Delivery form: coils (the weight of the bay is 0.45 t)

Rod length: 11.75 m

Class A-III reinforcing steel with a diameter of 10 mm made of A500C grade steel is designed for reinforcing reinforced concrete structures in civil and industrial construction. The grooved surface provides reliable adhesion to concrete, which increases the strength and stability of the structure to dynamic and static loads.

The A500C steel grade is characterized by high strength and good weldability, which makes the material convenient for the manufacture of frames, grids and monolithic structures. Rebar is widely used in the construction of foundations, floor slabs, columns, walls and other load-bearing elements.

The delivery is carried out in coils weighing 0.45 tons, as well as in bars with a standard length of 11.75 m. The products comply with the requirements of GOST 5781-82, are accompanied by quality certificates and are suitable for use in projects with high requirements for reliability and durability.

The automatic tura tower is a modern mobile equipment for the safe performance of high-altitude work without assembling scaffolding.

Specifications:

Manufacturer: JAS ENGINEERING (Kazakhstan)

Lifting type: electric, 220 V

Maximum height: 5.8 m

Load capacity: up to 220 kg

It is suitable for electrical installation, ventilation, finishing and maintenance work, warehouse and industrial premises.

Rent: 15,000 ₸ / day

Sale: price by agreement

The X-Rite RM200QC portable spectrocolorimeter is designed for instrumental measurement of the color difference of paint coatings.

The RM200QC accurately measures color by photographing a sample using 8 different visible light sources and 1 UV LED.

Light source/Observer: D65/10 and A/10

Measurement time: 1.8 seconds

Measuring area: 4 and 8 mm

Short-term repeatability: typical 0.10 DE 94 on white (D65/10)

Display: 4.5cm color TFT

Data interface: USB (Data storage device)

Operating temperature: 0° to 40°C (50° to 104°F)

Storage temperature: -20° to 60°C (-4° to 140°F)

Humidity range: 20-80% relative humidity (non-condensing)