Goods: Channels, I-beams and angles

A steel hexagon with a diameter of 22 mm made of St3 steel is used in mechanical engineering, construction and the manufacture of metal parts. It is used for manufacturing bolts, nuts, studs, fasteners, shafts and other structural products.

The material is characterized by good weldability and machinability, suitable for mechanical processing and subsequent heat treatment if necessary.

The delivery is carried out in bars with a length of 6.05 m. The products comply with the requirements of GOST and are accompanied by quality certificates. Delivery throughout Kazakhstan is possible.

Steel channel No. 20 made of St3sp-5 steel is used in construction and industry for the manufacture of load-bearing metal structures, building frames, support systems and floors. It is used in the construction of high-load facilities, including industrial and infrastructure projects.

The products are manufactured in accordance with GOST 8240-97 and GOST 535-88, they are characterized by high strength, bending resistance and good weldability.

The delivery is carried out in bars with a length of 12.05 m. The products are accompanied by quality certificates. Delivery in Kazakhstan.

Steel channel No. 5 made of St3sp-5 steel is used in construction, production of metal structures, installation of frame and support systems. It is used in the construction of floors, frames, reinforcement of load-bearing structures and the creation of metal frames for various purposes.

It is manufactured in accordance with the requirements of GOST 8240-97 and GOST 535-88, which guarantees compliance with the mechanical characteristics and quality of steel. It has high strength, good weldability and resistance to loads.

The delivery is carried out in bars with a length of 12.05 m. The products are accompanied by quality certificates. Prompt delivery across Kazakhstan is possible.

A 45×45×5 equal-floor metal corner made of St3ps/sp1-5 steel is used in the manufacture of metal structures, reinforcement of frames, and installation of supporting and load-bearing elements. It has high strength, good weldability and resistance to mechanical stress.

The delivery is carried out in bars with a length of 12.05 m. The products comply with the requirements of GOST, are accompanied by quality certificates and are available with delivery in Kazakhstan.

A 25×25×4 equal-floor metal corner made of St3ps/sp1-5 steel is used in construction, the manufacture of metal structures, frame systems, and the manufacture of supporting and reinforcing elements. The material is characterized by good weldability, strength and resistance to mechanical stress.

The delivery is carried out in bars with a length of 12.05 m. The products comply with the requirements of GOST, are accompanied by quality certificates and are available with prompt delivery in Kazakhstan.

Fittings, channel, corner, pipes, sheet, galvanized roll.Metallosklad-T company specializes in the manufacture and supply of rolled metal products (Kazakhstan and Russia) from high-quality materials, having been a reliable supplier of these products for 20 years and having a staff of experienced and qualified employees.

Due to continuous production in Almaty, Astana, Karaganda and Temirtau, we offer a wide range of rolled metal products (rebar, wire rod drawn in coils, channel, corner, beam, profile pipes, round pipes, g/k sheet, cotton, galvanized, corrugated, PVL, OK wire) at reasonable prices.

Phones of the sales department of Almaty

https: //metallosklad. kz

Buy high-quality I-beam St3 09G2S 255 355 from 10 to 100 mm from the production association KazMetService!

I-beam, also known as "I-beam", is a rolled metal product made of carbon and low-alloy steel, shaped like the letter "H" in cross-section. Its production is carried out by hot or cold rolling of a steel blank or welding of several elements into a single structure.

The qualification of an I-beam is varied:

- Normal with a slope of the inner edges of the shelves "H".- Columnar "K".

- Normal with parallel edges of the shelves "B".- Special "M" and "S".

- Wide-flange "Sh".

- Welded.

I-beams are used as the main supporting frame for interfloor ceilings. They have a number of advantages:

- Lighter than hot-rolled beams, have the ability to produce an asymmetrical section.

- Provide uniform load distribution and structural rigidity.

- Surpass square beams and shellers in strength.

- Resistant to temperature fluctuations and suitable for unheated rooms.

The KazMetService Production Association is a specialized complex that develops, tests, manufactures and sells products made of metals and alloys for various purposes. We offer finished metal products from partner plants and additional services such as laser cutting, pendulum saw cutting, waterjet cutting and much more.

When purchasing a beam from us, you get:

1. A guarantee of high product quality.

2. Individual approach and a large selection of non-ferrous metals, stainless steels and alloys.

3. Production and processing of metal according to your drawings and specifications.

4. Minimum terms of shipment and delivery.

5. Favorable terms of cooperation and delivery throughout the Republic of Kazakhstan and the CIS countries.

To find out the current price for a beam, contact our manager. The final price is formed depending on the terms of delivery, quantity and place of shipment. Our price list is not a public offer according to the Civil Code of the Republic of Kazakhstan.

Buying a beam from us is easy:

1. Leave a request.

2. We will issue you an invoice.

3. Pay in a way convenient for you.

4. Get your product.

Trust the professional experience of KAZMETSERVIS and provide your project with quality materials! To order, please call the number provided and indicate that you found the ad on the Maitrade marketplace.